(800) 927-3293

	Item	Name	Description	UrlSlug

Home page
Products
Rep Locator
Company
Resources
Featured Products
Contact us

Home page
Products
Rep Locator
Company
Resources
Featured Products
Contact us

Filter by attributes
Clear all

Application

Attatches conduit and boxes to flanges, wire, or rod.

Beam Clamp

Box Support in “Ceiling” (T-bar ceiling grid) NOT FOR FIXTURE OR FAN SUPPORT

Bracket supports electrical boxes from floor or channels.

Bridle Ring; Cable/Wire

Cable

Cable/Wire

Clips on electrical boxes for additional support.

Datacom and Low Voltage, Electrical, HVAC, Plumbing and Refrigeration

Designed to quickly secure vertical runs of Rigid, EMT, AC, MC, BX, or PVC to metal studs.

Designed to secure horizontal runs of Rigid, EMT, AC, MC, BX, or PVC through metal studs.

Electrical box

Electrical Box

Electrical box/T-Bar Grid

Electrical Conduit

Fasten conduit to decking

Fasten MC/AC Cable to Beam

Flange Clamp

For use with either metal or wood studs.

Installation in walls or ceilings with metal or wood studs. For use with ceiling fan (load limit = 70lbs) or lighting fixture (load limit = 110lbs)

Installed using a hammer only.

MC/AC Clip

Mount Fixture or Boxes to T-Bar

Mount to T-bar

Mounts Standard Low Voltage Plates

Mounts Standard Low Voltage Plates; For use with 1/2" - 1-1/4" thick wall

Mounts stardard outlets in oversized openings.

Positive method of supporting conduit and outlet boxes above acoustical T-Bar

Provides conduit support on both sides of electrical box

Provides support without stress to sensitive voice/data cables.

Rod/Wire

Secures conduit and electrical boxes to most structures.

Secures conduit to most metal studs.

Strap hanger

Stud wall cable support

Supports 1-1/2 or 2-1/8" Deep Boxes, Plaster Rings or Low Voltage Mounting Devices from One Bracket Between Studs

Supports boxes and conduit above T-bar.

Supports fixtures, transmitting the weight of the fixture directly to the building structure.

Supports flexible conduit and all types of cable from flanges.

Supports lighting fixtures from between T-Bars, with adjustable fixture position.

Suspend box

Suspends conduit from the side of beam.

Suspends rod/wire from overhead mountings with a clearance hole for 1/4" bolt.

Suspends threaded rod from vertical flange

Suspends wire and plain rod from overhead mountings.

Threaded Rod

To support Low-Voltage (Datacom) Cable

Used for hanging rod

Used in applications where an offset mounting solution is required.

Used to support vertical runs of cable against a stud, or other flat surface.

Used with SCX1X, 2SC4, SCT3, or SCT2

Vertical Flange

Z-Purlin Flange

Brand Name

Minerallac

Cable Size

0.218" – 0.281"

0.312" – 0.375"

0.375" – 0.437"

0.433-0.535"

0.468 - 0.562"

0.468" – 0.562"

0.562 - 0.718"

0.562" – 0.718"

0.750" – 0.937"

0.968" – 1.250"

12—2 thru 10–3

12-3 w/ ground NM Sheathed Cable; 14-2 w/ ground; 12-3 w/ ground; 12-4 through10-4; 3 stranded MC/AC Cable

Accommodates Cat. 5, Cat. 6, fiber-optic, and interduct cables.

Low voltage

Cable Type

AC/MC; Other

Flexible

MC or BX

MC, AC, or BX

MC/AC or Super Neutral

MC/AC, Isolated Ground or Super Neutral

Non

Clip Type

Batwings

Beam Clamp

Flange Clamp

Color

Black

Black; Silver

Silver

Silver & Black

Silver / Yellow

Silver/Black

Silver/Black/Yellow

Silver/Yellow

Silver; Black

Yellow

Consist Of

Box Bar Clip

Box Bar Clip(BBC); 1/4"-20 x 3/8"

Box Bar Clip: 1/4"-20 x 3/8"

Metal mounting clip, Fastener

Pre-galvanized steel with Black Claw™ spring steel fasteners riveted to part.

Construction

Manufactured

Molded

Riveted Assembly

Rolled/Stamped

Stamped

Stamped/Molded

Stamped/Molded/Riveted

Wire Formed

Fastening Holes

0.25 x 1.05

1/4"

1/4"-20

1/4"–20

3/8"-16

Bottom & Back 1/4"-20; 1/4"

Fill Capacity

125 cables (CAT5/CAT6)

18 cables (CAT5/CAT6)

35 cables (CAT5/CAT6)

Fill Capacity (CAT5/CAT6)

125 cables

18 cables

35 cables

Finish

Black

Black Oxide

Black Phosphate

Electro-Galvanized

No additional finish

Powder Coated

Pre-Galvanized

Pre-Galvanized/Zinc Phosphate and Oil

Pre-Galvanized/Zinc Plated

Stainless

Zinc Phosphate

Zinc Phosphate & Oil

Zinc Plated

Fits

EMT & MC/AC, 1/2" - 3/4"

EMT 1"

Flange Range

1/8" – 1/2"

1/8" - 1/4"

Flange Size

1/16" – 3/16"

3/16" – 9/32"

5/16" – 1/2"

Flange Width

0.500"

0.950"

1/2"

1/8" – 1/4"

5/16" – 1/2"

9/16" – 3/4"

Hanger Type

2-Piece T-Bar Clip

Conduit Clamp

Conduit Clip

Conduit Mounting Clip

Flange Clip

Plain Rod Hanger

Purlin Clip

Rod Hanger

Threaded Rod Hanger

Vertical Flange Clip

Height

0.600"

0.750 IN

0.750"

1.000"

1.375"

1.500"

1.875"

1-1/16"

2.000"

2.625"

2.750"

3.000"

3.375"

3-3/8"

4.000"

4-1/4"

Included

1/4"-20 Wing Nut Washer

1/4"-20 x 1 IN O.D. Wing Nut Washer

1/4"-20 x 3/8" Stud

1/4"-20 x 5/8" Stud; 1/4"-20 x 1" Wing Nut Washer

Wing Nut Washer

Installation

Clamp-On

Clip-On

Hammer On

Hammer-On

Hand

Push-In

Screw

Screw Fastened

Length

0.625"

0.750"

1.400"

1.420"

1.5"

12", 16", 18"

2 IN

2.000"

2.050"

24"

3.055"

3.600"

3-1/8”

4.130"

4.350"

4.500"

Load

100 lbs

15 lbs

160 lbs

200 lbs

25 lbs

30 lbs

75 lbs

75 lbs.

75lbs

Load Capacity

100

160

75 LB Max

Vertical Wire: 50 LBS; Vertical Flange: 25 LBS; Horizontal Flange: 100;

Material

22 Gauge Galvanized Steel

Engineered Plastic

Galvanized Steel/Spring Steel

High-Carbon Steel

Plastic

Pre Galvanized Steel

Pre Galvanized Steel/Spring Steel

Pre-Galvanized

Pregalvanized Steel

Pre-Galvanized Steel

Pre-Galvanized Steel, Spring Steel

Pre-Galvanized Steel/Spring Steel

Spring steel

Spring Steel

Spring Steel & PreGalvanized Steel

Spring Steel; Steel

Stainless Steel

Steel

Steel/Plastic

Steel/Spring Steel

Steel/Spring Steel/Plastic

Steel; Spring Steel

Material Of Construction

Spring Steel

Steel

Maximum Clamp Diameter

1/8" – 1/4"

5/16" – 1/2"

9/16" – 3/4"

Maximum Load

(Vertically / Horizontally) 25 / 15

100

75; 15/25 (Horizontal / Vertical)

Mounting

(2) 3/16" Holes

1/16" – 1/4" Angled Z Purlin Clip

1/2" Flange Clamp

1/4"

5/16" – 1/2" Hammer-On Flange Clip

9/16" – 3/4" Hammer-On Flange Clip

Angled Bracket

Clip-on

Dry Wall

Extended Bracket with 1/2" Flange Clip

Fastened

Fastener Required

Hammer-on

Hammer-On 1/16" – 1/4" Vertical Flange Clip

Hammer-On 1/8" – 1/4" Flange Clip

Hammer-On 5/16" – 1/2" Flange Clip

Hammer-On 9/16" – 3/4" Flange Clip

Hammer-on Flange Clip

Plain Hole

Press-on

Snap-on

T-Bar

Threaded Hole

Vertical, Horizontal

Via Fastener

Mounting Hole

1/4"

3/16"

Mounting Holes

(2) 3/16"

1 Threaded

1, with 1/4"-20 thread impression

10-24, 1/4"-20 Thread Impressions

Threaded

Mounting Holes O.C.

0.163"

0.250"

1/4"

Number Of Cables

Fits up to four 12-3 w/ ground NM Sheathed Cable; Fits four 14-2 w/ ground, or three 12-3 w/ ground, or two 12-4 through 10-4, or one up tp 6-3 stranded MC/AC Cable

Number of Holes

1, 3

Pipe Size

0.375"

0.375", 1.000"

0.500" - 0.750"

0.500", 0.750"

1.000"

1.250"

1.500"

2.000"

EMT 0.500"

EMT 0.500", EMT 0.750"

EMT 0.750", EMT 0.750"

EMT 0.750", Rigid/IMC 0.500"

EMT 1.000", Rigid/IMC 0.750"

Fits 1" Conduit

Fits 1" EMT

Fits 1" EMT, 3/4" Rigid & IMC

Fits 1/2" – 3/4" Conduit

Fits 1/2" and 3/4" Conduit

Fits 1/2" EMT

Fits 1-1/1" Conduit

Fits 1-1/2" Conduit

Fits 1–1/4" Conduit

Fits 2" Conduit

Fits 3/4" EMT

Fits 3/4" EMT, 1/2" Rigid & IMC

Fits 3/8" Conduit

Fits Conduit 3/8"

Rod Range

1/2" – 3/4"

EMT / Rigid: 1/2"

Rod Size

0.750"

1.500"

1/4"

1/4" – 3/8"

1/4" Threaded Rod

3/8"

3/8"-16

Fits 1" Conduit

Fits 1" EMT, 3/4" Rigid/IMC

Fits 1/2" EMT

Fits 1/2", 3/4" Conduit

Fits 1-1/2" Conduit

Fits 1-1/4" Conduit

Fits 2" Conduit

Fits 3/4" EMT, 1/2" Rigid/IMC

Fits 3/8" Conduit

Rope Size

#8 wire wire, 1/4" plain rod

3/8" plain rod

Set Screw

1/4"-20 x 1"

1/4"–20 x 3/8"

100 LBS (Vertically); 25 LBS (Horizontally)

Shape

"C"–Shaped

Rectangular

Straight/Bar

Size

(Ring Diameter) 1"

(Ring Diameter) 1-1/2"

(Ring Diameter) 2"

(Ring Diameter) 4"

0.50" x 1.25" x 1.00"

0.72” x 2.25” x 2.25”

0.750 x 1 x 2 IN

0.850 x 2.00 x 1.14

0.907 x 1.04 x 3.53

0.907 x 2.04 x 3.53

1.00" x 1.75" x 1.42"

1.10” x 1.13” x 0.54”

1.19 x 1.75 x 1.39

1.25 x 1.31 x 0.962

1.40 x 1.31 x 0.950

1.42" x 0.70" x 1.25"

1.45 x 1.94 x 1.12

1.46 x 1.75 x 1.42

1.60 x 1.00 x 0.720

1.64 x 1.32 x 0.918

1.75" x 1.50" x 1.125"

1.80 x 2.30 x 1.50

1.83 x 1.50 x 1.05

1.90 x 1.32 x 1.44

1.91 x 0.720 x 0.665

1/4" Threaded Rod with Threaded Impression

1-7/8”H X 2-1/4”W X 2-3/8”D

2.03 x 1.32 x 1.38

2.04 x 1.50 x 1.05

2.20 x 1.32 x 1.75

2.20 x 1.32 x 3.08

2.22 x 1.32 x 1.60

2.24 x 1.50 x 0.930

2.37 x 1.75 x 1.46

2.50 x 1.32 x 1.13

2.54 x 1.75 x 1.42

2.69 x 1.75 x 1.43

2.72 x 1.32 x 1.73

2.72 x 4.80 x 0.630

2.76 x 1.32 x 1.14

2.88 x 1.32 x 1.66

2.90" x 1.00" x 0.70"

2-1/2" x 3-1/2"

3.00 x 2.10 x 1.42

3.10 x 2.07 x 1.45

3.31 x 2.16 x 1.40

3.31" x 2.23" x 1.15"

3.50 x 1.96 x 1.18

3.52 x 1.00 x 0.423

3.60 x 1.75 x 1.41

3.600" x 1.000" x 0.750"

3.66 x 1.74 x 1.16

3.75 x 5.97 x 0.630

3.98 x 2.22 x 1.74

3/8" Threaded Rod with Threaded Impression

4.130" x 1.000" x 0.750"

4.23 x 2.48 x 0.06

4.350" x 1.250" x 0.750"

4.500" x 1.250" x 0.750"

4-1/2"H x 5-3/4"W x 3-1/2"D

6.25 x 2.25 x 2.84

7"x 2-1/8" x 4-1/2"

7.18 x 2.25 x 2.88

7.50 x 2.25 x 2.90

Connects 1" conduit runs to 1/2" or 3/4" conduit runs.

Connects 1" conduit runs to 1-1/4" conduit runs.

Connects 1" conduit to another 1" conduit run.

Connects 1/2" or 3/4" conduit runs to 1/2" or 3/4" conduit runs.

Connects 2" conduit to 1" conduit runs.

Connects 3/8" conduit runs to 1" conduit runs.

Connects EMT 1", Rigid/IMC 3/4" to EMT 1", Rigid/IMC 3/4" conduit runs.

Connects EMT 1/2" to EMT 1", Rigid/IMC 3/4" conduit runs.

Connects EMT 1/2" to EMT 1/2" conduit runs.

Connects EMT 1/2" to EMT 3/4" conduit runs.

Connects EMT 3/4" to EMT 3/4" conduit runs.

Connects EMT 3/4", Rigid/IMC 1/2" to EMT 1", Rigid/IMC 3/4" conduit runs.

Fits 1" Conduit

Fits 1" EMT, 3/4" Rigid/IMC

Fits 1" EMT, or 3/4" Rigid Conduit

Fits 1/16" – 5/16"

Fits 1/2" EMT

Fits 1/2" EMT Conduit

Fits 1/2" EMT or 3/4" Rigid Conduit

Fits 1/2" Flange; EMT 3/4"

Fits 1/2", 3/4" Conduit

Fits 1/8" – 1/4" Flange Thickness

Fits 3/4" EMT, 1/2" Rigid Conduit

Fits 3/4" EMT, 1/2" Rigid/IMC

Fits 3/8" Conduit, BX

Fits 3/8" or BX Conduit

Fits 3/8", BX Conduit

Fits 5/16" – 1/2" Flange Thickness

Fits 9/16" – 3/4" Flange Thickness

Fits Conduit 1"

Fits Conduit 1/2", 3/4"

Fits Conduit 1-1/2"

Fits Conduit 1-1/4"

Fits Conduit 2"

Fits Conduit 3/8"

Fits EMT & Rigid Conduit 1/2" - 3/4"

Fits EMT 1", Rigid/IMC 3/4"

Fits EMT 1/2"

Fits EMT 3/4", Rigid/IMC 1/2"

Fits up to 1/2" flange; fits 1" conduit.

Fits up to 1/2" Flange; fits 1" EMT, 3/4" Rigid/IMC

Fits up to 1/2" Flange; fits 1/2" EMT

Fits up to 1/2" flange; fits 1/2", 3/4" conduit.

Fits up to 1/2" flange; fits 1/4" conduit.

Fits up to 1/2" flange; fits 1-1/2" conduit.

Fits up to 1/2" Flange; fits 3/4" EMT and 1/2" Rigid/IMC

For mounting 1" conduit to Z Purlin

For mounting 1/2" or 3/8" conduit to Z Purlin

For mounting 1-1/4" conduit to Z Purlin

For mounting 3/8" conduit to Z Purlin

for use with #8 wire or 1/4" plain rod

For use with 1/4" or 3/8" rod. Requires a nut for installation.

for use with 1/4" threaded rod with thread impression

For use with 1/4" threaded rod with thread impression.

For use with 1/4" threaded rod, 1/16" – 5/32" Flange

For use with 1/4" threaded rod.

For use with 1/4" to 3/8" threaded rod. Nut required for fastening.

For use with 3/8" plain rod

For use with 3/8" plain rod.

For use with 3/8" rod.

For use with 3/8" threaded rod with thread impression

For use with 3/8" threaded rod with thread impression.

For use with 3/8" threaded rod, 1/16" – 5/32" Flange

For use with 3/8" threaded rod.

For use with 5/8" stud length, 1" t-bar

For use with1/4" to 3/8" threaded rod.

H 1-3/4” x W 2” x D 5/8”

H 4.25 x W 2.5 x D 0.375

H 4-3/8” x W 7/8” x D 2-1/4”

H 4-3/8” x W 7/8” x D 2-3/4”

H 5” x W 7/8” x D 1-3/8”

H 5-1/8 x W 17-1/4 x D 1/2

H 5-3/4” x W 7/8” x D 2-1/2”

H 6” x W 7/8” x D 2-3/4”

One-Size

One-Size-Fits-Most

Special Features

1- 1/2"Box to studs on 16" centers

1/16-3/16" Flange

1/4" Bottom Hole

1-½” clearance from deck per NEC

2" Base

2-1/2" and 3-1/2" wood or metal studs

2-1/2", 3-1/2" and 4" wood or metal studs

2-1/8"Box to studs on 16" centers

24" acoustical T-bar

24" T-bar (TBARHDXT extension available)

3-5/8" steel studs; 1-1/2" or 2-1/8" Boxes

4" Base

6" wood or metal studs

Accommodates Up to Three 4 or 4 11/16" Boxes or Plaster Rings

Box to Stud Fastener

Breakapart Design

Comes with a cable saddle

Comes with an included saddle piece.

Conduit clip will pivot 360 degrees.

Designed to secure horizontal runs of Rigid, EMT, AC, MC, BX, or PVC through metal studs.

D-Ring; Ring size 2.25" x 3"

D-Ring; Ring size 3.25" x 3"

D-Ring; Ring size 4.25" x 3"

Easy to install, no tools required

Features a beam clamp assembly, instead of multi-function clip.

Features a metal stud clip riveted to a conduit clamp.

Features a metal stud clip riveted to a conduit clip.

Fits 1" T-bar; 2" Stud

Fits 1" T-bar; 5/8" Stud

Fits 1/16"-1/4" Flange

Fits 1/16"-1/8" Z-Purlin

Fits 1/2"- 3/4" EMT & Rigid

Fits 1/2"- 3/4" EMT/Rigid

Fits 1/8 - 1/4" Flange; Fits 1/2" and 3/4" EMT/Rigid

Fits 1/8 - 1/4" Flange; Fits 1-1/2" EMT/Rigid

Fits 1/8 - 1/4" Flange; Fits 1-1/4" EMT/Rigid

Fits 1/8 - 1/4" Flange; Fits 2" EMT/Rigid

Fits 1/8"-1/4" Flange; #8 Wire or 1/4" Rod

Fits 1/8"-1/4" Flange; 1/4" or 3/8" Threaded Rod; Nut Required

Fits 1/8"-1/4" Flange; 1/4" Threaded Rod

Fits 1/8"-1/4" Flange; 2" Base

Fits 1/8"-1/4" Flange; 3/8" Threaded Rod

Fits 1/8"-1/4" Flange; Fits 1" EMT & 3/4" Rigid

Fits 1/8"-1/4" Flange; Fits 1" EMT/Rigid

Fits 1/8"-1/4" Flange; Fits 1/2" EMT

Fits 1/8"-1/4" Flange; Fits 3/4" EMT & 1/2" Rigid

Fits 1/8"-1/4" Flange; Fits 3/8" EMT/Rigid

Fits 1/8"-3/8" Flange; Fits #12 Wire thru 1/4" Rod; 2" Base

Fits 1/8"-3/8" Flange; Fits #12 Wire thru 3/8" Rod

Fits 1/8-1/4" Flange

Fits 1/8-1/4" Flange; 1/4"-20 x 3/8" Stud

Fits 14-2, 14-3, & 12-2 Cable #12 Thru #8 Wire; Fits 12-3 Cable #12 Wire

Fits 15/16 IN T-Bar, 1/4"-20 x 5/8 IN Stud

Fits 15/16" T-bar; 1/4"-20 x 5/8" Stud

Fits 3/32"- 9/64" Flange

Fits 5/16" - 1/2" Flange; Fits 1" EMT/Rigid

Fits 5/16" - 1/2" Flange; Fits 1/2"-3/4" EMT/Rigid

Fits 5/16" - 1/2” Flange

Fits 5/16"-1/2" Flange

Fits 5/16"-1/2" Flange; 1/4" or 3/8" Threaded Rod; Nut Required

Fits 5/16"-1/2" Flange; 1/4"-20 Threaded Rod

Fits 5/16"-1/2" Flange; 3/8" Threaded Rod

Fits 5/16"-1/2" Flange; Fits 1/2" & 3/4" EMT & Rigid

Fits 5/16"-1/2" Flange; Fits 3/4" EMT & 1/2" Rigid

Fits 5/16-1/2" Flange

Fits 9/16" - 3/4" Flange; Fits 1/2"-3/4" EMT/Rigid

Fits 9/16" - 3/4" Flange; Fits 3/8" EMT/Rigid

Fits 9/16" - 3/4" Flange; Fits up to 1" Strap; Strap Parallel to Beam

Fits 9/16" - 3/4" Flange; Fits up to 1" Strap; Strap Perpendicular to Beam

Fits 9/16"-3/4" Flange; 1/4" or 3/8" Threaded Rod; Nut Required

Fits 9/16"-3/4" Flange; 1/4" Threaded Rod

Fits 9/16"-3/4" Flange; 3/8" Threaded Rod

Fits 9/16-3/4" Flange

Fits Flange 1/8" - 1/4"; Fits up to 1" Strap; Strap Parallel to Beam

Fits Flange 1/8" - 1/4"; Fits up to 1" Strap; Strap Perpendicular to Beam

Fits Flange 5/16" - 1/2"; Fits up to 1" Strap; Strap Parallel to Beam

Fits Flange 5/16" - 1/2"; Fits up to 1" Strap; Strap Perpendicular to Beam

Fits Ring Dia. 1-1/2"

Fits Ring Dia. 2"

Fits Round or Rectangular T-bars

Fits up to 1" Strap

Heavy-Duty Electrical Box Support for 2-1/2" and 3-1/2" Wood or Metal Studs; Fits 4" or 4-11/16" Electrical Boxes, Pre-Galvanized

Installed using a hammer only.

Low Voltage

Metal Stud

No fastener required

One-Piece Break-Away Design; Prevents Box pullout

Secures cables 1-1/4 from face of the stud.

Suspends conduit from bottom of beam. Conduit clip will pivot 360 degress.

Telescoping Box Mounting Bracket, Stud Spacing 11 to 18 in., For use with 1-1/2 in. or 2-1/8 in. electrical box, Pre-Galvanized

Telescoping Box Mounting Bracket, Stud Spacing 15-1/2 to 25 in., For use with 1-1/2 in. or 2-1/8 in. electrical box, Pre-Galvanized

Telescoping Box Mounting Bracket, Stud Spacing 17 to 26 in., For use with 1-1/2 in. or 2-1/8 in. electrical box, Pre-Galvanized

Telescoping Mounting Bracket w Octagon Elec. Box

Standard

Heavy-Duty Electrical Box Support for 2-1/2" and 3-1/2" Wood or Metal Studs; Fits 4" or 4-11/16" Electrical Boxes, Center Mark on Stud Side; Pre-Galvanized

UL #27PE

UL #9N38

UL Control #4L28

UL Control #9N38

Sub Brand

Black Claw

Blackclaw

Cully

Mineralla Traditional

Minerallac Traditional

Sub Brand

Black Claw

Blackclaw

Minerallac Traditional

Traditional

Thickness

0.023

0.030"

0.032

0.035

0.035"

0.040

0.042

0.048

0.050

0.060"

0.074"

0.085

0.105

0.162"

0.213"

0.30

Angle Bracket 0.074"; Strap Hanger 0.035

Beam Clamp 0.042; Conduit Clip 0.035

Beam Clamp 0.042; Conduit Clip 0.042

Flange Clamp 0.048; Strap Hanger 0.035

Flange Clamp 0.048; Conduit Clip 0.035

Flange clamp 0.048; Conduit clip 0.035?

Flange Clamp 0.048; Rod Hanger 0.040

Flange clamp 0.050; Strap hanger 0.040?

J Hook 0.050; Beam Clamp 0.042

J Hook 0.050; Multi-Function Clip 0.035

Stud Clamp 0.045; Conduit Clip 0.035

Stud Fastener 0.050; Conduit Clip 0.035

Thread Impression

(Wood Screw) 1/4"

(Wood Screw) 1/4" Lag Thread

(Wood Screw) 1/4"–20

(Wood Screw) 3/16" Lag Thread

1/4"–20

Trade Size

0.975 x 0.975 x 2.22

1.25 x 1.07 x 1.35

1.25 x 17.12 x 2.57

1.25x18.375x.1.95

1.63" x 0.50" x 0.68"

2–1/2" Metal Studs

2–1/2" thru 4" Metal Studs

3.22 x 24.00 x 1.63

3.22 x 24.00 x 8.00

3–1/2" Metal Studs

4" Metal Studs

5.25 x 3.50 x 0.023

5.27 x 3.50 x 0.022

5.68 x 4.75 x 4.00

5.87 x 4.75 x 3.50

5.87 x 4.75 x 6.00

6" Metal Studs

Adjustable from 1/4" through 3/4" drywall.

Designed to mount 4" square boxes to 1" conduit.

Designed to mount 4" square boxes to 1" conduit. Fits flanges from 1/8" – 1/4"

Designed to mount 4" square boxes to 1" EMT or 3/4" Rigid conduit.

Designed to mount 4" square boxes to 1/2" – 3/4" conduit. Fits flanges from 1/8" – 1/4"

Designed to mount 4" square boxes to 1/2" – 3/4" conduit. Fits flanges from 5/16" – 1/2"

Designed to mount 4" square boxes to 1/2" EMT conduit.

Designed to mount 4" square boxes to 1/2", 3/4" conduit.

Designed to mount 4" square boxes to 3/4" EMT or 1/2" Rigid conduit.

Designed to mount 4" square boxes to 3/8" conduit.

Designed to mount 4" square boxes to 3/8" conduit. Fits flanges from 1/8" – 1/4"

Designed to mount 4" square boxes to 3/8" conduit. Fits flanges from 5/16" – 1/2"

Designed to stud mount 4" square boxes to 1" conduit.

Designed to stud mount 4" square boxes to 1" EMT or 3/4" Rigid conduit.

Designed to stud mount 4" square boxes to 1/2" EMT conduit.

Designed to stud mount 4" square boxes to 1/2", 3/4" conduit.

Designed to stud mount 4" square boxes to 3/8" conduit.

Supports a 1–1/2" box to studs on 24" centers.

Supports a 2–1/8" box to studs on 24" centers.

Will mount 4" square boxes, and fits conduit size 1" EMT, 3/4" Rigid. Fits Flanges 1/8" – 1/4"

Will mount 4" square boxes, and fits conduit size 1" EMT, 3/4" Rigid. Fits Flanges 5/16" – 1/2"

Will mount 4" square boxes, and fits conduit size 1/2" EMT. Fits Flanges 1/8" – 1/4"

Will mount 4" square boxes, and fits conduit size 1/2" EMT. Fits Flanges 5/16" – 1/2"

Will mount 4" square boxes, and fits conduit size 1/4" EMT, or 1/2" Rigid. Fits Flanges 1/8" – 1/4"

Will mount 4" square boxes, and fits conduit size 1/4" EMT, or 1/2" Rigid. Fits Flanges 5/16" – 1/2"

Type

2-Piece T-Bar Clip

Angle Bracket with Strap Hanger

Angled Bracket

Angled Bracket with Conduit Clip

Beam Assemblies

Beam Clamp

Beam Clamp / Conduit Hanger Assembly

Beam Clamp with Conduit Clip

Beam Clamp with J Hook

Beam Clamp with Stud

Beam Clamp/MCAC Clip

Beam Clamp; Conduit Clip (Assembly)

Beam Clamp-MC/AC Clip

Box mounting bracket

Box Mounting Bracket

Box Support

Box Support, Telescoping

Box to Bar Mounting Clip

Box to Stud Support

Bracket Support

Bridle Ring

Cable Clip

Cable Support

Cable Support Strap

Conduit Clamp

Conduit Clip

Conduit Strap

Conduit to Stud Support

Conduit to Stud Support Assembly

Drop Wire Clip

Electrical Box Hardware Assembly

Far-Side Box Support

Flange Clamp

Flange Clamp with Conduit Clip

Flange Clamp with Rod Hanger

Flange Clamp with Strap Hanger

Flange Hanger

Flange Mount Conduit Clamp Assembly

Flange Mount Conduit Clip Assembly

Flexible conduit/Cable clip

Flexible conduit/Cable Clip

Flexible Conduit/Cable Fastener

J Hook

Light Support Assembly

Metal Stud Fastener with Conduit Clip

Mounting Assembly

Mounting Bracket

Multi-Function Clip

Multi-Function Clip Assemblies

Multi-Function Clip with J Hook

Offset Bracket

Outlet Retainer

Purlin Clip

Purlin Hanger

Rod Hanger

Rod to Flange Hanger

Saddle

Snap-On Flange Clip

Standoff Conduit Hanger

Strap

Stud Clip

Stup Clip Adapter

Support Fasteners

T-bar Clip

T-bar Clip; 2pc-scissor

T-Bar Fastener Assembly

T-Bar Fasteners

Twist On T-bar Clip

Universal Plastic Grommet

Vertical Flange Hanger

Wing Nut Washer

Z-Purlin Hanger

Ultimate Static Load Limit

(Horizontal / Vertical) 15 / 25

(Horizontal / Vertical) 25 / 100

Width

0.500"

0.750"

0.875"

1 IN

1.000"

1.125"

1.250"

1.312"

1.375"

1.500"

1.750"

1.875"

1-1/2"

1-1/2”

1-1/4"

2.250"

2.500"

3.5"

3.575"

3-1/4"

4-1/4

4-1/4"

8.000"

Wire Range

#8 – 1/2"

#8 – 1/4"

Categories

Products

Blackclaw

View as Grid List Table

Sort by

J-Hook with Bracket & Beam Clamp

Blackclaw

J200BBC916

2" J-Hook, Right Angle Bracket And Hammer On Beam Clamp 9/16-3/4" Flange, W/ Plastic Wire Retaining Clip, PG/SP

1/2-1" EMT & MC/AC Sprt Dp SP

Blackclaw

CS121D

1/2-1" EMT & 14-2 to 12-3 MC/AC Cable Support for 2-1/8" Deep Electrical Box, Screw on to Wood or Metal Studs, Aligns conduit to standard box knockout

1/4 Rod Z Purlin Clip SP

Blackclaw

PH14

Hammer On Z Purlin Hanger And 1/4"-20 Threaded Rod Hanger Assembly, Z Purlin 13 To 16 Gauge, #8 Wire Or 1/4" Plain Rod. , Spring Steel

1/4or3/8 Rod Z Purlin Clip SP

Blackclaw

PH1438N

1/4"-20 Threaded Rod Hanger Assembly, Z Purlin 13 To 16 Gauge,Used For Hanging Rod, 1/4 Or 3/8" Threaded Rod Hanger, Nut Required, Spring Steel

11-18in Box Mntg Bracket PG

Blackclaw

BMB16T

Telescoping 11-18" Box Mounting Bracket, For 1-1/2" Or 2-1/8" Deep Electrical Box, PG

15-1/2 to 25 in. Mntg. Bracket

Blackclaw

BMB1624T

Telescoping Box Mounting Bracket, Stud Spacing 15-1/2 To 25 In., For Use With 1-1/2 In. Or 2-1/8 In. Electrical Box, PG

First
Previous
3
4
5
6
7
Next
Last

Information

Careers
About Us
Customer Service Hours
Contact us
Spec Sheets
Cross Reference

Locations

Corporate Office
100 Gast Rd
Hampshire, IL 60140
West Coast Shipping
4118 B Place NW
Suite A
Auburn, WA 98001
(800) 927-3293

4 Ways to Order

Toll-free Fax:
(800) 824-8942
orders@minerallac.com
100 Gast Rd.
Hampshire, IL 60140
EDI

Follow us

LinkedIn
YouTube